After the relationship between the PC server and internet connection can run smoothly step is the next synchronization. So that all computers can tersinkronisasi correctly, following are the steps that must be done:
1) Synchronize Computer Name / Name of the PC and the Work Group is done in a way
as follows:
a. Showing Task Control System
b. In the Computer Name tab click Change to change the name of the computer and workgroup name. Name of the computer should be sorted according to the number Clientnya easier for us to remember the name of each computer, name of each PC may not be the same. But for the workgroup name must be made is the same for all Client and Server.
c. After we change the name of the PC the next step is to change Network ID with the Network ID tab click on the task before the Control System.
* On the question How Do You Use This Computer choose this option Computer is part of a business network, and then click Next.
* Option on next choose the Network without a Domain.
* Then fill in the name according to the workgroup name WorkGorup we fill in the time to change the name of the PC in the step (b) earlier.
* Then Click Next and then Finish. Wait some time until the computer completes an alterative Network ID and do restrat Operating System / Reboot.
2) Time Synchronization / Time conducted through the following steps:
a. Double click the clock in the bottom left corner of your desktop.
b. Choose tabs = Internet Time> Update Now
c. Wait some time until there is a following statement: The time has ben succesfully Synchronized.
d. If the statement is an error to appear, then click Update Now repeat until successfully synchronize your PC time with the Windows server.
e. If the update was successful, but the clock shown is not the same, then the error
setting time zone:
installation is based on where we live, because different regions setiab time.
as an example: I take zones from Indonesia
GMT + 07.00 Bangkok, Hanoi, Jakarta, while for WITA is
GMT +08.00 Perth and WIT with 09.00 GMT + Seoul.
Internet Connection Sharing (ICS)
Up to this stage, the PC is connected keinternet hanyalan PC server only. To provide access for a PC client that has access to the internet we need to Internet Connection Sharing that we have on the PC server. The steps are
as follows:
1) Open the Network Connection window in the Control Panel. Then right-click on our active connection to the internet => select Properties
2) In the Advanced tabs enable the option Allow other network users to connect through this computer's Internet Connection.
3) After a successful Internet connection sharing in the fruits will appear 2 kinds of connections. Should change the name of each connection in order to easily distinguish between connection that is connected to the modem connection that is connected to the Switch me-how to rename each connection
4) If we open the connection properties are connected to the Switch, the support tabs there is an IP address that will be the default gateway for the PC Client akan connected through a PC Server (192.168.0.1).
Network Setup
Mentioned only a step to give permission for the Client PC to be able to access the Internet. To enable permissions to the way it was set up Network / Network that we have. Step process is as follows:
1) Open the Network Setup Wizard in the Control Panel. Then do the as in the picture. (make sure connection to the internet in a state of life).
Click Next
Click Next
Click Next
2) In the options select a Connection Method select the Connect Directly to the Internet for PC and server when installation do on the PC Client choose Option to Connect the internet through a residental gateway.
3) Option Next we determine the connection request, which we will use to make a dial-up to the Internet. Choose a connection that is connected to the modem. This option is not there at the time we do the settings in the PC Client
4) Fill in accordance with the Computer Name has a name that we gave earlier, and fill Computer Description if you want (Optional / not be no effect).
5) Fill in name according to the workgroup name that we specify. Need remind me again that the workgroup name should be the same for all computers so that the setting step easier.
6) Select the option Turn On File Sharing and Printing in the next task
7) After setting the log window right click on it we have to run / Enabling
8) Wait for some time to adjust the computer is finished with installation new.
9) Select the option just finish the wizard, click Next => Finish. Usually the PC will automatically
reboot after completing the procedure earlier. Step we do the same on all PC Client. Differences in how the settings between the PC Server and PC Client is located just on the point 2 and point 3.
After completing these steps installation do on the PC Client testing connection in the same way with the PC Server, which is the site address that is easy to Loading in and test the connection speed. When the connection is too slow it is please do check on installation Network earlier if there are any options or not, and also do checks on whether the correct cable connection yet.
Until this step is all the PC Client can be connected to the Internet for free Turn on the PC Server connection. To restrict the use of the PC Client is several options. The first is to make the list user's client computer, where the user have the right to access the internet which is not
allowed to access them. installation are usually used in offices. While the cafe, access restrictions is usually done with the install program on the billing server and PC Client. Billing for the product in the country there are already some of the program www.billingexplorer.com
www.indobilling.com and are for the purpose of setting this please contact the distributor billing respectively. Here is an example view of the program issued by the Billing Explorer.
Hopefully this guide useful for all of us.
....
After the relationship between the PC server and internet connection can run smoothly step is the next synchronization. So that all computers can tersinkronisasi correctly, following are the steps that must be done:
1) Synchronize Computer Name / Name of the PC and the Work Group is done in a way
as follows:
a. Showing Task Control System
b. In the Computer Name tab click Change to change the name of the computer and workgroup name. Name of the computer should be sorted according to the number Clientnya easier for us to remember the name of each computer, name of each PC may not be the same. But for the workgroup name must be made is the same for all Client and Server.
c. After we change the name of the PC the next step is to change Network ID with the Network ID tab click on the task before the Control System.
* On the question How Do You Use This Computer choose this option Computer is part of a business network, and then click Next.
* Option on next choose the Network without a Domain.
* Then fill in the name according to the workgroup name WorkGorup we fill in the time to change the name of the PC in the step (b) earlier.
* Then Click Next and then Finish. Wait some time until the computer completes an alterative Network ID and do restrat Operating System / Reboot.
2) Time Synchronization / Time conducted through the following steps:
a. Double click the clock in the bottom left corner of your desktop.
b. Choose tabs = Internet Time> Update Now
c. Wait some time until there is a following statement: The time has ben succesfully Synchronized.
d. If the statement is an error to appear, then click Update Now repeat until successfully synchronize your PC time with the Windows server.
e. If the update was successful, but the clock shown is not the same, then the error
setting time zone:
installation is based on where we live, because different regions setiab time.
as an example: I take zones from Indonesia
GMT + 07.00 Bangkok, Hanoi, Jakarta, while for WITA is
GMT +08.00 Perth and WIT with 09.00 GMT + Seoul.
Internet Connection Sharing (ICS)
Up to this stage, the PC is connected keinternet hanyalan PC server only. To provide access for a PC client that has access to the internet we need to Internet Connection Sharing that we have on the PC server. The steps are
as follows:
1) Open the Network Connection window in the Control Panel. Then right-click on our active connection to the internet => select Properties
2) In the Advanced tabs enable the option Allow other network users to connect through this computer's Internet Connection.
3) After a successful Internet connection sharing in the fruits will appear 2 kinds of connections. Should change the name of each connection in order to easily distinguish between connection that is connected to the modem connection that is connected to the Switch me-how to rename each connection
4) If we open the connection properties are connected to the Switch, the support tabs there is an IP address that will be the default gateway for the PC Client akan connected through a PC Server (192.168.0.1).
Network Setup
Mentioned only a step to give permission for the Client PC to be able to access the Internet. To enable permissions to the way it was set up Network / Network that we have. Step process is as follows:
1) Open the Network Setup Wizard in the Control Panel. Then do the as in the picture. (make sure connection to the internet in a state of life).
Click Next
Click Next
Click Next
2) In the options select a Connection Method select the Connect Directly to the Internet for PC and server when installation do on the PC Client choose Option to Connect the internet through a residental gateway.
3) Option Next we determine the connection request, which we will use to make a dial-up to the Internet. Choose a connection that is connected to the modem. This option is not there at the time we do the settings in the PC Client
4) Fill in accordance with the Computer Name has a name that we gave earlier, and fill Computer Description if you want (Optional / not be no effect).
5) Fill in name according to the workgroup name that we specify. Need remind me again that the workgroup name should be the same for all computers so that the setting step easier.
6) Select the option Turn On File Sharing and Printing in the next task
7) After setting the log window right click on it we have to run / Enabling
8) Wait for some time to adjust the computer is finished with installation new.
9) Select the option just finish the wizard, click Next => Finish. Usually the PC will automatically
reboot after completing the procedure earlier. Step we do the same on all PC Client. Differences in how the settings between the PC Server and PC Client is located just on the point 2 and point 3.
After completing these steps installation do on the PC Client testing connection in the same way with the PC Server, which is the site address that is easy to Loading in and test the connection speed. When the connection is too slow it is please do check on installation Network earlier if there are any options or not, and also do checks on whether the correct cable connection yet.
Until this step is all the PC Client can be connected to the Internet for free Turn on the PC Server connection. To restrict the use of the PC Client is several options. The first is to make the list user's client computer, where the user have the right to access the internet which is not
allowed to access them. installation are usually used in offices. While the cafe, access restrictions is usually done with the install program on the billing server and PC Client. Billing for the product in the country there are already some of the program www.billingexplorer.com
www.indobilling.com and are for the purpose of setting this please contact the distributor billing respectively. Here is an example view of the program issued by the Billing Explorer.
Hopefully this guide useful for all of us.
....